How to Stop Patrol on Hikvision Cameras382

Hikvision cameras are widely used in surveillance systems due to their reliability and advanced features. One of the common features of Hikvision cameras is the patrol function, which allows the camera to automatically pan, tilt, and zoom to cover a wider area.

While the patrol function can be useful in certain situations, there may be times when you need to stop the camera from patrolling. This can be done through the camera's web interface or by using the Hikvision software.

Stopping Patrol Through the Web Interface

1. Log in to the camera's web interface using your username and password.
2. Click on the "Setup" tab.
3. Click on the "PTZ" tab.
4. Find the "Patrol" section and uncheck the "Enable Patrol" box.
5. Click on the "Save" button.

Stopping Patrol Using Hikvision Software

1. Open the Hikvision software.
2. Click on the "Configuration" tab.
3. Click on the "PTZ" tab.
4. Find the "Patrol" section and uncheck the "Enable Patrol" box.
5. Click on the "Save" button.

Additional Notes

Once you have stopped the patrol function, the camera will remain in its current position. If you need to change the camera's position, you can do so manually by using the PTZ controls in the web interface or software.

If you are having trouble stopping the patrol function, you can try resetting the camera to its default settings. To do this, use a paperclip or toothpick to press the reset button on the camera.

2024-10-29

Previous：Jinshan District Hotel Surveillance Camera Recommendations: Expert Insights and Supplier Information

Next：How to Get the Most Out of Your High-Definition Security Camera