How to Reset Hikvision Camera IP Address: A Comprehensive Guide282

## Reset Hikvision Camera IP Address


Introduction
Hikvision cameras are widely used in surveillance systems due to their reliability and features. However, there may be times when you need to reset the camera's IP address, such as when you're changing network settings or troubleshooting connectivity issues. In this article, we will guide you through the steps on how to reset the IP address of a Hikvision camera.


Methods for Resetting Hikvision Camera IP Address
There are two main methods for resetting the IP address of a Hikvision camera:
1. Reset Button Method
2. Software Method
Reset Button Method
1. Locate the reset button on the camera. It is usually a small, recessed button located on the back or bottom of the camera.
2. Use a paperclip or similar tool to press and hold the reset button for 10-15 seconds.
3. The camera will reboot and its IP address will be reset to the default value.
Software Method
1. Access the camera's web interface using a web browser.
2. Log in to the camera using the default username and password.
3. Navigate to the "Network" or "System" section of the camera's menu.
4. Find the IP address settings and enter the new IP address you want to use.
5. Click on the "Save" or "Apply" button to save the changes.


Using SADP Tool for Hikvision Camera IP Reset
If you are unable to access the camera's web interface, you can use Hikvision's SADP tool to reset the camera's IP address.
1. Download and install the SADP tool from the Hikvision website.
2. Connect the camera to your computer using an Ethernet cable.
3. Open the SADP tool and click on the "Search" button to find the camera.
4. Select the camera from the list and click on the "Modify IP Address" button.
5. Enter the new IP address you want to use and click on the "OK" button.


Resetting Hikvision Camera IP Address via Cloud Service
If you have enabled Hikvision's cloud service for your camera, you can also reset the IP address remotely using the Hik-Connect app.
1. Open the Hik-Connect app on your mobile device.
2. Log in to your Hikvision account.
3. Select the camera you want to reset and click on the "Settings" button.
4. Navigate to the "Network" section and find the IP address settings.
5. Enter the new IP address you want to use and click on the "Save" button.


Troubleshooting Hikvision Camera IP Reset Issues
If you are having trouble resetting the IP address of your Hikvision camera, here are a few troubleshooting tips:
* Make sure that the camera is powered on and connected to your network.
* Check that the reset button is being pressed for the correct amount of time (10-15 seconds).
* Try using a different web browser to access the camera's web interface.
* Reset the camera to factory default settings if the above methods don't work.

Hikvision cameras offer reliable surveillance solutions, but may require IP address resets for network changes or troubleshooting. This article provides detailed instructions and alternative methods to reset Hikvision camera IP addresses, including the reset button method, software method, SADP tool utilization, and cloud service options. Additionally, troubleshooting tips are included to address potential issues during the reset process.

2025-02-02

---

Previous：Top-Rated Security Monitors for Enhanced Surveillance

Next：Dad‘s Guide to Outdoor Surveillance Cameras