Hikvision DS-7104 Surveillance Setup Guide27

The Hikvision DS-7104 is a 4-channel network video recorder (NVR) designed for surveillance applications. It supports a wide range of IP cameras and offers advanced features such as motion detection, recording scheduling, and remote monitoring. This guide will provide step-by-step instructions on how to set up the Hikvision DS-7104 NVR for optimal surveillance.

Prerequisites
Hikvision DS-7104 NVR
IP cameras compatible with Hikvision NVRs
Ethernet cables for connecting the NVR and cameras
Monitor and mouse for configuring the NVR

Hardware Installation
Connect the Ethernet cables from the IP cameras to the PoE ports on the NVR.
Connect the NVR to a monitor and mouse using the appropriate cables.
Power on the NVR and wait for it to boot up.

Software Configuration1. Log in to the NVR: Use the default IP address (usually 192.168.1.108) and password (admin) to log in to the NVR.
2. Configure the Network Settings: Go to "Network" > "TCP/IP" and configure the network settings, including IP address, subnet mask, and gateway.
3. Add IP Cameras: Go to "Camera" > "IP Camera" and click "Add." Enter the IP address, port, username, and password of the IP camera.
4. Configure Recording Settings: Go to "Storage" > "Record" and configure the recording mode, resolution, frame rate, and other parameters.
5. Enable Motion Detection: Go to "Event" > "Motion Detection" and enable motion detection for each camera. Configure the sensitivity, detection area, and other settings.
6. Set Up Notifications: Go to "Event" > "Notification" and configure email or push notifications for motion detection events.
7. Configure Remote Access: Go to "Network" > "DDNS" and configure the DDNS server (e.g., ) to enable remote access.

Troubleshooting* NVR not powering on: Check the power supply and ensure the NVR is connected properly.
* Cannot log in to the NVR: Check the IP address and password settings or contact your system administrator.
* IP cameras not detected: Check the Ethernet connections, IP camera settings, and ensure the cameras are compatible with the NVR.
* Recording issues: Check the recording schedule, storage space, and ensure the cameras are configured correctly.
* Motion detection not working: Check the motion detection settings, detection area, and sensitivity.

ConclusionThe Hikvision DS-7104 NVR is a powerful and versatile surveillance solution. By following the steps outlined in this guide, you can successfully set up the NVR and optimize its performance for effective monitoring. Remember to periodically check the system, update firmware, and troubleshoot any issues promptly to ensure reliable operation.

2025-01-27

Previous：Xi‘an Video Surveillance System Guide: Securing Your City

Next：Top Spherical Wireless Security Camera Recommendations