Hikvision Surveillance: Scheduled Video Recording Configuration229

Introduction
Hikvision surveillance cameras offer advanced features, including scheduled video recording, which allows you to customize the recording process based on your specific requirements. This article provides a comprehensive guide to configuring scheduled video recording on Hikvision surveillance cameras. By understanding and implementing these settings, you can optimize your surveillance system to meet your desired monitoring and recording needs.

Step 1: Access the Camera's Settings

To begin configuring scheduled video recording, you must first access the camera's settings. This can be done through the following methods:
Web Interface: Open a web browser and enter the camera's IP address in the address bar. Enter the camera's username and password to log in.
Software Client: Launch the Hikvision iVMS-4200 software and connect to the camera. Right-click on the camera and select "Configuration" to open the settings.

Step 2: Configure Recording Schedule

Once logged into the camera's settings, navigate to the "Record" tab. Under the "Recording Schedule" section, you will see several options for configuring the recording schedule:
Enable Record Schedule: Enable this option to activate scheduled video recording.
Recording Mode: Select the desired recording mode from the options provided (e.g., Continuous, Motion Detection, Event Trigger).
Record Timer: Specify the desired recording schedule by setting up time periods for recording. You can create multiple time periods with different recording settings.

Step 3: Recording Settings

In the "Record" tab, you can further refine the recording settings:
Stream Type: Select the video stream from the camera that you want to record (e.g., Main Stream, Sub Stream).
Video Format: Choose the desired video format for the recordings (e.g., H.264, H.265).
Resolution: Set the resolution of the recorded videos.
Frame Rate: Specify the desired frame rate for the recordings.
Bit Rate: Configure the bit rate for the recordings.

Step 4: Storage Management

To ensure sufficient storage for your recordings, it is crucial to manage the storage settings. In the "Storage" tab:
Storage Type: Select the storage device for the recordings (e.g., SD Card, HDD).
Storage Path: Specify the specific path on the storage device where the recordings will be stored.
Pre-record Time: Set the desired pre-record time to capture footage before an event trigger.
Post-record Time: Specify the desired post-record time to continue recording after an event trigger.
Storage Cleanup: Configure the storage cleanup settings, such as the retention period for recordings and the maximum storage capacity.

Step 5: Advanced Settings

The "Advanced" tab provides additional settings for fine-tuning your recording configuration:
Overwrite Mode: Select the overwrite mode for the recordings when the storage capacity is reached.
Recording Extension: Specify the file extension for the recorded videos.
Video Loss Alarm: Enable video loss alarm to receive notifications in case the camera loses video input.

Conclusion

By configuring scheduled video recording on your Hikvision surveillance camera, you gain control over the recording process and optimize it based on your specific requirements. By following the steps outlined in this guide, you can ensure that your system captures the desired footage, stores it securely, and provides valuable evidence when needed. Remember to tailor the settings to align with your surveillance goals and adjust them as your needs evolve.

2025-01-20

Previous：Wireless Remote Monitoring Solutions: A Comprehensive Guide

Next：Embrace the Ultimate Smart Surveillance: A Beginner‘s Guide to Reolink Security Cameras