Change the IP Address of Your Hikvision Security Camera256

## How to Change the IP Address of a Hikvision Camera


Step 1: Access the Camera's Web Interface
* Open a web browser and enter the camera's default IP address (usually 192.168.1.108).
* Enter the default username (admin) and password (12345).


Step 2: Navigate to Network Settings
* Click on the "Network" tab in the menu bar.
* Select the "Basic Settings" submenu.


Step 3: Configure the IP Address
* In the "IP Address" field, enter the new IP address you want to assign to the camera.
* Ensure that the "Subnet Mask" and "Gateway" settings are correct for your network configuration.


Step 4: Set the Camera's DNS Server
* In the "DNS Settings" section, select "Manual" as the DNS Server Mode.
* Enter the primary and secondary DNS server IP addresses.


Step 5: Save the Changes
* Click the "Save" button at the bottom of the page.
* The camera will reboot with the new IP address.


Troubleshooting Tips
* Cannot access web interface: If you cannot access the camera's web interface, try using SADP (Hikvision's search tool) to discover the camera's IP address.
* Cannot connect to new IP address: Ensure that the camera is properly connected to the network and that your computer is on the same subnet as the camera.
* IP address conflict: If there is already a device with the same IP address on the network, the camera will not be able to use that address. Assign a unique IP address.
* Lost all settings: If you accidentally reset the camera to factory default settings, you will need to reconfigure all the settings, including the IP address.


Additional Notes
* The default port for Hikvision cameras is 8000.
* Always use a wired connection for the most stable network performance.
* Consider using a static IP address to avoid future connectivity issues.
* If you have multiple Hikvision cameras, you can use a Network Video Recorder (NVR) to manage their IP addresses and other settings.


Conclusion
Changing the IP address of a Hikvision camera is a straightforward process that can be completed in a few easy steps. By following the instructions outlined in this article, you can ensure that your camera is properly configured and accessible on your network.

This comprehensive guide provides step-by-step instructions on how to change the IP address of a Hikvision security camera. Whether you're setting up a new camera or need to adjust its network settings, this article has you covered.

Learn how to access the camera's web interface, navigate to the network settings, configure the IP address, set the DNS server, and save the changes. Troubleshooting tips are also included to help you overcome any potential issues you may encounter.

By following the guidance in this article, you can ensure that your Hikvision camera is properly configured and accessible on your network. Improve the security and performance of your surveillance system with ease!

2025-01-19

---

Previous：Intelligent Doorway Monitoring Solutions for Shoe Racks

Next：Hikvision Surveillance Playback Frame Skipping: Causes and Solutions