Salt Lake Kanghui Surveillance Debugging148

Salt Lake Sea Kang is a professional manufacturer of surveillance equipment. Its products include cameras, recorders, and accessories. Salt Lake monitors are widely used in various scenarios such as homes, offices, and public places. In order to ensure the normal operation of the camera, it is necessary to debug the camera after installation.

Here are the steps for Salt Lake Haikang monitoring debugging:

1. Check the power supply

Make sure that the camera is connected to a stable power supply. The power supply voltage should be within the specified range. If the power supply is unstable, it may cause the camera to restart or even damage it.

2. Check the network connection

Make sure that the camera is connected to the network correctly. The network cable should be connected to the correct port on the camera and the network switch. If the network connection is not correct, the camera will not be able to transmit data.

3. Check the camera settings

Enter the camera settings interface, check the camera's IP address, subnet mask, gateway, and DNS settings. Make sure that these settings are correct. If the settings are incorrect, the camera will not be able to communicate with the network.

4. Check the camera image

Open the camera monitoring software, check the camera's image. If the image is abnormal, it may be caused by camera lens problems, focus problems, or image settings problems. Adjust the camera settings to make the image normal.

5. Check the camera recording

Open the camera recording playback software, check the camera's recording. If the recording is abnormal, it may be caused by camera storage problems, recording settings problems, or network problems. Check the camera's storage space, recording settings, and network settings to make the recording normal.

6. Check the camera alarm

Open the camera alarm settings interface, check the camera's alarm settings. Make sure that the alarm settings are correct. If the alarm settings are incorrect, the camera will not be able to trigger an alarm when an event occurs.

By following the above steps, you can debug the Salt Lake Haikang surveillance equipment. If you encounter any problems during debugging, you can contact the Salt Lake Haikang technical support for help.

2025-01-15

Previous：High-Definition Security Monitoring with Hikvision CAD Drawings

Next：How to Troubleshoot Network Connectivity Issues with Hikvision Cameras