Hikvision CCTV Reset After Power Loss90

Hikvision CCTV systems are designed to maintain their settings and recordings even in the event of a power outage. However, in some cases, it may be necessary to reset the system to its factory default settings. This can be done by following the steps below:1. Power off the CCTV system. To do this, unplug the power cord from the back of the DVR or NVR.
2. Wait 30 seconds. This will allow the system to fully power down.
3. Power on the CCTV system. Plug the power cord back into the back of the DVR or NVR.
4. The system will now start up and go through its initialization process. This may take a few minutes.
5. Once the system has finished initializing, you will need to reconfigure it. This includes setting the date and time, adding cameras, and configuring recording settings.

If you are unable to reset the system using the steps above, you may need to contact Hikvision technical support.

Additional Tips

Here are a few additional tips for resetting a Hikvision CCTV system after a power loss:* If the system is still under warranty, you may be able to get it repaired or replaced for free.
* If you are not comfortable resetting the system yourself, you can hire a professional to do it for you.
* Before resetting the system, make sure to back up any important recordings.

Troubleshooting

If you are having trouble resetting your Hikvision CCTV system, here are a few things to try:* Make sure that the power cord is securely plugged into the back of the DVR or NVR.
* Try resetting the system using the reset button on the back of the DVR or NVR.
* If the system still does not reset, you may need to contact Hikvision technical support.

Conclusion

Resetting a Hikvision CCTV system after a power loss is a relatively simple process. By following the steps above, you can quickly and easily get your system up and running again.

2025-01-13

Previous：Hikvision Surveillance Footage Shadows

Next：Proactive Monitoring: Why You Need Monitoring Software