Default IP Address for Hikvision Surveillance Cameras117

Hikvision, a leading provider of surveillance solutions, assigns default IP addresses to its cameras to facilitate easy configuration and access during the initial setup process. Understanding the default IP address of your Hikvision camera is crucial for successful installation and remote monitoring.

Locating the Default IP Address

There are several methods to determine the default IP address of your Hikvision surveillance camera:
Camera Label: The default IP address is typically printed on a label affixed to the camera's housing.
User Manual: Consult the user manual that came with the camera for the default IP address.
Default IP Address Generator: Utilize the Hikvision default IP address generator tool provided on the official website.

Common Default IP Address Ranges

Hikvision assigns different default IP address ranges based on the camera model and series. Here are some common default IP address ranges:
DS-2CD series: 192.168.1.64
DS-2CE series: 192.168.1.108
DS-7000 series: 192.168.1.10
DS-2600 series: 192.168.1.168

Accessing the Camera

To access your Hikvision surveillance camera remotely, follow these steps:
Connect the camera to a network using an Ethernet cable.
Open an Internet browser on a computer connected to the same network.
Enter the default IP address in the browser's address bar.
The camera's login page will appear. Enter the default username and password (usually "admin" for both).

Changing the Default IP Address

It is recommended to change the default IP address of your Hikvision camera for security reasons. Here's how to do it:
Access the camera's web interface using the default IP address.
Navigate to the "Network" menu.
Find the "IP Address" section and click on "Edit."
Enter a new IP address that is not already in use on your network.
Click on "Save" to apply the changes.

Additional Notes

Here are some additional notes to consider:
Some Hikvision cameras also support DHCP, which automatically assigns an IP address from your network's DHCP server.
If you have lost the default IP address or cannot access the camera's web interface, you can reset the camera to factory defaults by pressing the reset button located on the camera's housing.

Conclusion

Understanding the default IP address of your Hikvision surveillance camera is essential for a smooth installation and remote monitoring. By following the guidelines outlined in this article, you can easily access, configure, and secure your Hikvision camera.

2024-10-27

Previous：Venus Monitoring Pole Manufacturers Recommendation

Next：Hunan Hikvision Surveillance Installation and Configuration Guide