Hikvision ISC Monitoring Configuration Guide262
Hikvision's ISC platform (Intelligent Surveillance Center) is a comprehensive video surveillance and management system that provides a wide range of features for monitoring and managing IP cameras and other surveillance devices. This guide will provide step-by-step instructions on how to configure Hikvision ISC for monitoring.
Prerequisites
Before you begin, ensure that you have the following:
Hikvision ISC software installed on your computer
IP cameras or other surveillance devices connected to your network
Admin account for Hikvision ISC
Adding Cameras
To add cameras to Hikvision ISC, follow these steps:1. Launch Hikvision ISC and log in with the admin account.
2. Go to the "Device Management" tab.
3. Click on the "Add" button.
4. Select the "IP Camera" tab.
5. Enter the IP address, port, and username/password for the camera.
6. Click on the "OK" button.
Configuring Monitoring
Once the cameras are added, you can configure the monitoring settings:1. Go to the "Monitoring" tab.
2. Select the camera you want to configure.
3. Click on the "Monitor Config" button.
4. Configure the following settings, as desired:
- Recording mode: Continuous, event triggered, or manual
- Recording schedule: Set the recording time intervals
- Event detection: Motion detection, tampering detection, etc.
- Notifications: Email, SMS, push notifications
5. Click on the "OK" button to save the changes.
Viewing Live Video
To view live video from the cameras, follow these steps:1. Go to the "Live View" tab.
2. Select the camera you want to view.
3. The live video will start playing.
4. You can use the controls at the bottom of the screen to zoom, pan, and adjust the settings.
Managing Recordings
Hikvision ISC stores recordings on your local computer or a network storage device. To manage recordings, follow these steps:1. Go to the "Playback" tab.
2. Select the camera and time period you want to view.
3. Click on the "Search" button.
4. A list of recordings will be displayed.
5. You can double-click on a recording to play it back.
Troubleshooting
If you encounter any issues with Hikvision ISC monitoring, try the following troubleshooting steps:
Check that the cameras are connected to the network and pingable.
Verify that the admin account has the necessary permissions.
Restart the Hikvision ISC software.
Contact Hikvision technical support for further assistance.
2025-01-09

Ultimate Guide to Installing and Configuring Weighbridge Monitoring Systems: A Step-by-Step Pictorial Tutorial
https://www.51sen.com/ts/87268.html

Lao Lin Security Camera Installation Guide with Pictures
https://www.51sen.com/ts/87267.html

HIKVISION vs. Dahua: A Deep Dive into Two Surveillance Giants
https://www.51sen.com/se/87266.html

Hikvision Outdoor Surveillance: A Comprehensive Guide to Selection, Installation, and Maintenance
https://www.51sen.com/se/87265.html

Setting Up Object Tracking in Your Surveillance System: A Comprehensive Guide
https://www.51sen.com/ts/87264.html
Hot

Home Security Systems: The Ultimate Guide
https://www.51sen.com/se/10066.html

Hikvision Surveillance to TV: Enhancing Your Home Security and Entertainment
https://www.51sen.com/se/9706.html

Fall Detection Recommendations: Enhancing Safety for the Elderly
https://www.51sen.com/se/9683.html

XingRui Vehicle Monitoring System: A Comprehensive Guide
https://www.51sen.com/se/55115.html

Indoor Security Camera Recommendations for Home and Business
https://www.51sen.com/se/10489.html