How to Remotely Access Your Hikvision Cameras over the Internet226

If you have Hikvision cameras installed at your home or business, there's a good amount of chances you want to be able to access them remotely. This allows you to keep an eye on your property no matter where you are in the world.

In this step-by-step guide, we'll show you how to remotely access your Hikvision cameras through the internet. We'll cover everything from setting up port forwarding on your router to installing the necessary software on your computer and smartphone.

1. Setup Port Forwarding on Your Router

The first step is to setup port forwarding on your router. This will allow you to access your cameras from the outside world. The ports you need to forward will vary depending on the model of your cameras, but they are typically in the range of 8000 to 9000.

To set up port forwarding, you will need to log in to your router's web interface. The IP address of your router can usually be found on the bottom of the device. Once you are logged in, look for a section called "Port Forwarding" or "Virtual Servers.".

Create a new port forwarding rule for each camera. The following information will need to be entered:
Name: Enter a name for the rule, such as "Hikvision Camera 1" or "Hikvision Camera 2".
External Port: Enter the external port that you want to use to access the camera. This can be any port in the range of 8000 to 9000.
Internal Port: Enter the internal port that the camera is using. This can be found in the camera's network settings.
IP Address: Enter the IP address of the camera.
Protocol: Select "TCP" or "UDP".

Once you have entered all of the information, click "Save" or "Apply." The port forwarding rule will be created, and you will be able to access your camera from the outside world.

Most router manufacturers provide knowledge base articles regarding this topic, and they can be found by searching for router port forwarding.

2. Install the Hikvision Software on Your Computer

Next, you need to install the Hikvision software on your computer. This software will allow you to view and control your cameras remotely.

The Hikvision software is available for download from the Hikvision website. Once you have downloaded the software, install it on your computer.

Once the software is installed, open it and click on the "Add Device" button. Enter the IP address of your camera and the port that you forwarded in the previous step. Click on the "OK" button.

The software will now connect to your camera. You will be able to view and control your camera remotely.

3. Install the Hik-Connect App on Your Smartphone

If you want to access your cameras remotely from your smartphone, you can install the Hik-Connect app. This app is available for download from the App Store (iOS) or Google Play (Android).

Once you have installed the app, open it and create an account. Once you have created an account, you can add your cameras to the app.

To add a camera to the app, tap on the "+" button and select "Add Device." Enter the IP address of your camera and the port that you forwarded in the previous step. Click on the "OK" button.

The app will now connect to your camera. You will be able to view and control your camera remotely.

Troubleshooting

If you are having problems accessing your cameras remotely, there are a few things that you can check:
Make sure that you have forwarded the correct ports on your router.
Make sure that the Hikvision software is installed and running on your computer.
Make sure that the Hik-Connect app is installed and running on your smartphone.
Make sure that your cameras are connected to the internet.
Make sure that your firewall is not blocking the Hikvision software or the Hik-Connect app.

2025-01-08

Previous：Highly Effective Electrical Monitoring Equipment for Industrial Environments

Next：Construction Material Monitoring Recommendations