Hikvision Surveillance Camera Reset Guide120

Hikvision surveillance cameras are known for their reliability and performance. However, like any other electronic device, they may occasionally encounter issues that require a reset. Resetting a Hikvision camera can resolve a wide range of problems, including network connectivity issues, frozen images, and unresponsive controls.

There are two main methods for resetting a Hikvision surveillance camera: using the physical reset button or via the web interface. The physical reset button is usually located on the back or bottom of the camera. To reset the camera using the reset button, hold it down for about 10 seconds until the camera restarts.

If you cannot access the physical reset button, you can reset the camera via the web interface. To do this, open a web browser and enter the IP address of the camera into the address bar. The default IP address for Hikvision cameras is 192.168.1.108.

Once you have entered the IP address, you will be prompted to enter a username and password. The default username is "admin" and the default password is "12345". Once you have logged in, click on the "Configuration" tab and then on the "System" tab. Under the "System" tab, you will find a section called "Restore to Default". Click on the "Restore" button and then click on the "OK" button to confirm.

After the camera has been reset, it will restart and the default settings will be restored. You will need to重新配置the camera with your desired settings.

Troubleshooting Reset Issues

If you are having trouble resetting your Hikvision camera, there are a few things you can try.
Make sure that you are using the correct reset method. If you are trying to reset the camera using the web interface, make sure that you are using the correct IP address and that you have entered the correct username and password.
Try resetting the camera using the physical reset button. If the web interface method is not working, try resetting the camera using the physical reset button. Make sure to hold the button down for at least 10 seconds.
Contact Hikvision technical support. If you are still having trouble resetting your camera, contact Hikvision technical support for assistance.

2025-01-04

Previous：Hikvision Surveillance System Connectivity

Next：Environmental Monitoring Equipment: Top Brand Recommendations