Hikvision NVR Deregistration78

IntroductionHikvision network video recorders (NVRs) are widely used in video surveillance systems due to their reliability, functionality, and cost-effectiveness. However, circumstances may arise where it becomes necessary to deregister an NVR from its associated surveillance system. This article provides a step-by-step guide on how to perform Hikvision NVR deregistration.

Reasons for NVR Deregistration* Removing the NVR from the existing surveillance system
* Transferring the NVR to a different location or network
* Troubleshooting and resolving technical issues
* Replacing the NVR with a new one

Prerequisites* Physical access to the NVR
* Network connectivity to the NVR
* Administrator credentials for the NVR

Step-by-Step Guide to NVR Deregistration1. Log in to the NVR: Using a web browser, navigate to the NVR's IP address and log in with the administrator credentials.
2. Go to the "System" menu: Locate the "System" menu in the NVR's web interface and select it.
3. Select "Network" and then "IP Address": In the "System" menu, click on "Network" and then select "IP Address" from the submenu.
4. Click on the "DHCP" tab: In the "IP Address" section, click on the "DHCP" tab.
5. Disable DHCP and enter static IP address: Uncheck the "Obtain IP address automatically (DHCP enabled)" checkbox. Enter a static IP address, subnet mask, and default gateway for the NVR. These values should be compatible with the network configuration.
6. Click "Save": Click the "Save" button to apply the static IP address settings.
7. Go to the "Configuration" menu: Return to the "System" menu and select "Configuration."
8. Select "General" and then "Deregister Device": In the "Configuration" menu, click on "General" and then select "Deregister Device" from the submenu.
9. Confirm deregistration: A confirmation message will appear asking if you want to deregister the device. Click "Yes" to confirm.
10. Restart the NVR: After confirming the deregistration, restart the NVR by clicking on the "Restart" button in the web interface.

Post-Deregistration Actions* After the NVR is restarted, it will no longer be associated with the previous surveillance system.
* If desired, the NVR can now be added to a new surveillance system by following the registration process.
* If the NVR is not immediately added to a new system, it should be powered off until it is needed.

Troubleshooting Tips* If you encounter any issues during NVR deregistration, verify the following:
* You are using the correct administrator credentials.
* The NVR is connected to the network.
* You are entering a valid static IP address configuration.
* If you continue to have difficulties, contact Hikvision technical support for assistance.

2024-12-26

Previous：Hikvision Surveillance Hard Drive Parameters

Next：HikVision 32-Channel Surveillance System: Unparalleled Monitoring for Large-Scale Applications