How to Unlock Hikvision Surveillance Devices310

Hikvision is a leading provider of surveillance and security solutions. Their cameras and other devices are used in a wide variety of applications, from homes and businesses to schools and government buildings. However, there are times when you may need to unlock a Hikvision device, such as when you have forgotten the password or when you need to reset the device to its factory settings.

There are two main ways to unlock a Hikvision device: using the web interface or using the SADP tool. The web interface is the preferred method, as it is more user-friendly and does not require any additional software.

Using the Web Interface

To unlock a Hikvision device using the web interface, follow these steps:1. Open a web browser and enter the IP address of the device in the address bar.
2. Enter the username and password for the device. The default username is "admin" and the default password is "12345".
3. Click on the "Configuration" tab.
4. Click on the "System" tab.
5. Click on the "Unlock" button.
6. Enter the unlock code in the field provided. The unlock code can be found on the device label or in the user manual.
7. Click on the "OK" button.

Using the SADP Tool

If you do not have access to the web interface, you can use the SADP tool to unlock a Hikvision device. The SADP tool is a software application that can be downloaded from the Hikvision website. Once you have downloaded and installed the SADP tool, follow these steps:1. Open the SADP tool.
2. Click on the "Add" button.
3. Enter the IP address of the device in the field provided.
4. Click on the "Search" button.
5. The SADP tool will display a list of all Hikvision devices on the network.
6. Select the device that you want to unlock.
7. Click on the "Unlock" button.
8. Enter the unlock code in the field provided. The unlock code can be found on the device label or in the user manual.
9. Click on the "OK" button.

Tips

Here are a few tips for unlocking a Hikvision device:* If you have forgotten the password for the device, you can reset the device to its factory settings. This will erase all of the data on the device, so be sure to back up your data before resetting the device.
* If you are having trouble unlocking the device using the web interface or the SADP tool, you can contact Hikvision technical support for assistance.
* If you are still having trouble unlocking the device, you may need to physically reset the device. To do this, locate the reset button on the device and press and hold it for 10 seconds. This will reset the device to its factory settings.

2024-10-24

Previous：Hikvision Remote Monitoring Card: A Comprehensive Guide to Enhanced Surveillance

Next：Hikvision Camera Serial Numbers: Unraveling Their Secrets