Hikvision Surveillance Host Configuration387

Introduction

Hikvision surveillance hosts are powerful devices that can be used to manage and monitor multiple IP cameras. They provide a graphical user interface (GUI) that makes it easy to configure and operate the cameras, and they support a wide range of features, including motion detection, recording, and playback. This article will provide step-by-step instructions on how to set up a Hikvision surveillance host.

Requirements

Before you begin, you will need the following:
A Hikvision surveillance host
A computer with a web browser
The IP address of the surveillance host

Step 1: Access the Surveillance Host GUI

The surveillance host's GUI can be accessed using a web browser. To do this, open a web browser and enter the IP address of the surveillance host. The login page will appear.

Step 2: Log In

Enter the username and password for the surveillance host. The default username is "admin" and the default password is "12345".

Step 3: Configure the Network Settings

The first step is to configure the network settings for the surveillance host. To do this, click on the "Network" tab in the GUI.

On the "Network" page, you can configure the following settings:
IP address
Subnet mask
Default gateway
DNS server

Once you have configured the network settings, click on the "Apply" button to save your changes.

Step 4: Add Cameras

The next step is to add cameras to the surveillance host. To do this, click on the "Camera" tab in the GUI.

On the "Camera" page, you can click on the "Add" button to add a new camera. When adding a camera, you will need to specify the following information:
Camera name
Camera IP address
Camera username
Camera password

Once you have specified the camera information, click on the "OK" button to add the camera.

Step 5: Configure the Recording Settings

The next step is to configure the recording settings for the surveillance host. To do this, click on the "Record" tab in the GUI.

On the "Record" page, you can configure the following settings:
Recording mode
Recording schedule
Recording resolution
Recording quality

Once you have configured the recording settings, click on the "Apply" button to save your changes.

Step 6: Configure the Motion Detection Settings

The next step is to configure the motion detection settings for the surveillance host. To do this, click on the "Motion Detection" tab in the GUI.

On the "Motion Detection" page, you can configure the following settings:
Motion detection sensitivity
Motion detection area
Motion detection alarm

Once you have configured the motion detection settings, click on the "Apply" button to save your changes.

Conclusion

These are just the basic steps on how to set up a Hikvision surveillance host. For more detailed instructions, please refer to the Hikvision user manual.

2024-10-24

Previous：Hikvision Surveillance Wall Mounting Solutions: A Comprehensive Guide

Next：Hikvision PTZ Camera Cloud Setup