How to Record on a Hikvision Surveillance Camera215

Hikvision is one of the leading manufacturers of surveillance cameras and other security equipment. Their cameras are known for their high quality and reliability, but they can also be a bit complex to set up and use. If you're having trouble figuring out how to record on a Hikvision surveillance camera, this guide will walk you through the steps.

Step 1: Log in to the camera's web interface

To log in to the camera's web interface, you will need to know its IP address. You can find the IP address by using the Hikvision IP Config Tool. Once you have the IP address, open a web browser and enter it into the address bar. You will be prompted to enter a username and password. The default username is "admin" and the default password is "12345".

Step 2: Go to the "Record" tab

Once you are logged in to the camera's web interface, go to the "Record" tab. This tab is where you will find all of the settings related to recording.

Step 3: Select the recording mode

The first thing you need to do is select the recording mode. There are two recording modes available: continuous recording and motion detection recording. Continuous recording records everything that the camera sees, while motion detection recording only records when motion is detected.

Step 4: Set the recording schedule

Once you have selected the recording mode, you need to set the recording schedule. The recording schedule determines when the camera will record. You can set the camera to record 24/7, or you can set it to record only during certain times of day or week.

Step 5: Set the recording resolution

The recording resolution determines the quality of the recorded video. The higher the resolution, the better the quality of the video. However, higher resolutions also require more storage space.

Step 6: Set the frame rate

The frame rate determines how many frames per second the camera will record. The higher the frame rate, the smoother the video will be. However, higher frame rates also require more storage space.

Step 7: Set the storage location

The storage location determines where the recorded video will be stored. You can store the video on the camera's internal storage, or you can store it on a network-attached storage (NAS) device.

Step 8: Click the "Save" button

Once you have made all of your settings, click the "Save" button. The camera will now start recording.

Troubleshooting

If you are having trouble recording on your Hikvision surveillance camera, there are a few things you can check:
Make sure that the camera is connected to a power source.
Make sure that the camera is connected to a network.
Make sure that the recording settings are correct.
Make sure that the storage location has enough free space.

If you are still having trouble, you can contact Hikvision technical support for help.

2024-10-21

Previous：Hikvision Remote Video Monitoring: Enhancing Security and Surveillance

Next：Enhancing Security with Hikvision‘s Networked Surveillance