How to Remotely Configure a Hikvision Surveillance Device9

In this article, we will provide a comprehensive guide on how to remotely configure a Hikvision surveillance device. Hikvision is a leading manufacturer of video surveillance products, and its devices are used by businesses and organizations around the world. We will cover the following topics:
Prerequisites
Accessing the device's web interface
Configuring the device's network settings
Configuring the device's video settings
Configuring the device's recording settings
Configuring the device's motion detection settings
Configuring the device's email settings
Saving the configuration changes

Prerequisites

Before you can remotely configure a Hikvision surveillance device, you will need the following:
The IP address of the device
The username and password for the device
A web browser

Accessing the device's web interface

To access the device's web interface, open a web browser and enter the IP address of the device into the address bar. You will then be prompted to enter the username and password for the device. Once you have entered the correct credentials, you will be logged into the device's web interface.

Configuring the device's network settings

The first step in configuring a Hikvision surveillance device is to configure the device's network settings. To do this, click on the "Network" tab in the left-hand menu. On the Network page, you can configure the following settings:
IP address
Subnet mask
Default gateway
DNS server

Configuring the device's video settings

Once you have configured the device's network settings, you can configure the device's video settings. To do this, click on the "Video" tab in the left-hand menu. On the Video page, you can configure the following settings:
Resolution
Frame rate
Bitrate
Image quality

Configuring the device's recording settings

Next, you can configure the device's recording settings. To do this, click on the "Recording" tab in the left-hand menu. On the Recording page, you can configure the following settings:
Recording mode
Recording schedule
Storage location

Configuring the device's motion detection settings

You can also configure the device's motion detection settings. To do this, click on the "Motion Detection" tab in the left-hand menu. On the Motion Detection page, you can configure the following settings:
Motion detection sensitivity
Motion detection area
Motion detection alarm actions

Configuring the device's email settings

Finally, you can configure the device's email settings. To do this, click on the "Email" tab in the left-hand menu. On the Email page, you can configure the following settings:
SMTP server
SMTP port
Email address
Email password

Saving the configuration changes

Once you have made all of the desired configuration changes, click on the "Save" button at the bottom of the page. The device will then save the changes and reboot. After the device has rebooted, the new configuration settings will take effect.

2024-10-21

Previous：Hikvision Surveillance: Remote Setup Guide

Next：Hikvision Surveillance Cameras: Enhancing Security and Monitoring